Music wall mural guitar and headphones design
Reference: F11513This vibrant design features guitars, headphones, and a microphone intertwined with musical notes. The dynamic composition highlights various musical elements, creating an energetic atmosphere. Perfect for music lovers, it showcases essential audio equipment alongside classic instruments.
Transform your space with our stunning Music wall mural guitar and headphones design. This vibrant illustration captures the essence of music through a captivating blend of musical instruments, including a guitar and headphones, surrounded by floating music notes. The urban vibe of this design makes it a perfect addition to any music lover's haven, bringing life and energy into your home or studio.
Why this product should be used for decoration
The Music wall mural guitar and headphones design music wall mural is not just a decorative piece; it’s an inspiration! Elevate your living space with this extraordinary mural that ignites passion and creativity. Imagine the joy it brings as it envelops your walls, turning your room into a vibrant celebration of music. This design is perfect for creating an ambiance that resonates with your love for sound and rhythm, making any area feel alive!
How to apply this product
Applying the Music wall mural guitar and headphones design music wall mural is a breeze! Use a roller and brush to apply glue on the wall, position the mural, and smooth it out with a cutter. Enjoy a quick and satisfying transformation!
This magnificent mural is manufactured in matt colours and made from non-woven wallpaper, ensuring durability for 10-15 years. It can be easily cleaned with a damp cloth and a little neutral soap, keeping it looking fresh for years to come. The mural is produced and shipped in rolls 50 centimeters wide, making it convenient to handle. Plus, it features an M2 reaction to fire certification for added safety. When it's time for a change, simply wet the surface with a sprayer for easy removal!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.