Tropical big leaves wall mural nature
Reference: F7080The Tropical big leaves wall mural nature design features a stunning array of leaves, plants, and palm trees, creating a lush and vibrant illustration that will bring the beauty of nature into any space. The matt colours give it a sophisticated and elegant look, while the non-woven wallpaper material ensures durability and ease of application. To apply this mural, simply use glue and tools like a roller, brush, and cutter. Once in place, it can be easily cleaned with a damp cloth and neutral soap. With a grammage of 180 grams per square metre and a durability of 10-15 years, this mural is not only visually striking but also long-lasting. Additionally, it has an M2 reaction to fire certification, providing peace of mind for safety. When it's time for a change, it can be easily removed by wetting the product with a sprayer. Transform any room into a tropical oasis with this captivating wall mural!
Why this product should be use for the decoration
The Tropical big leaves wall mural nature is the perfect choice for bringing the beauty of nature indoors. Its lush and vibrant design creates a stunning focal point in any room, instantly transforming the space into a tropical paradise. With its sophisticated colour palette and high-quality material, this mural adds a touch of elegance to any decor. Whether in a living room, bedroom, or office, this mural brings a breath of fresh air and a sense of relaxation to any environment.
How to apply this product
Transforming your space with the Tropical big leaves wall mural nature is easy and straightforward. Simply apply glue to the wall or the product, then use a roller and brush to carefully place the mural in the desired location. Use a cutter to trim any excess material for a perfect fit. Once in place, use a damp cloth and a little neutral soap to clean the mural as needed. The result will be a stunning and durable tropical paradise that will last for years to come!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.