Multicolor flowers design entrance wallpaper
Reference: P7833The multicolor flowers design entrance wallpaper features a vibrant and lively graphic that brings the beauty of spring into any space. With its stunning display of multicolored petals, this wallpaper is the perfect choice for adding a touch of nature to your home.
Why this product should be used for decoration
Transform your space with the mesmerizing beauty of the Multicolor flowers design entrance wallpaper. This unique wallpaper will instantly elevate the look of any room, adding a pop of color and a touch of nature to your home decor. Whether you're looking to create a bold statement wall or simply add a playful touch to your space, this wallpaper is the perfect choice!
How to apply this product
Applying the Multicolor flowers design entrance wallpaper is a breeze. Simply use glue to adhere the non-woven wallpaper to your wall or chosen surface. Use a roller, brush, and cutter for easy application. Cleaning is simple with a damp cloth and neutral soap, and the wallpaper has a durable construction that will last for 10-15 years. When it's time for a change, removal is easy with just a spritz of water!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.
the
13/12/2025
at
14:21 h
the
10/09/2025
at
07:25 h
the
23/06/2025
at
21:34 h
the
13/03/2025
at
12:50 h
the
20/12/2024
at
15:34 h
the
07/09/2024
at
09:39 h