Semi oblong shape design 70's retro wallpaper
Reference: P5655Transform your space with our Semi oblong shape design 70's retro wallpaper, featuring a stunning geometrical pattern in vibrant orange. This unique design captures the essence of the 70s, combining retro flair with modern aesthetics to create an eye-catching focal point in any room!
Why this product should be used for decoration
The Semi oblong shape design 70's retro wallpaper is perfect for those looking to add a touch of nostalgia and vibrancy to their home. Its bold geometrical patterns and warm orange hues inspire creativity and joy, making it an ideal choice for living rooms, bedrooms, or creative spaces. This wallpaper invites a lively atmosphere that encourages relaxation and conversation, ideal for family gatherings or cozy nights in!
How to apply this product
Applying the Semi oblong shape design 70's retro wallpaper is a breeze! Simply use glue on the wall and tools like a roller, brush, and cutter to ensure a smooth installation. Enjoy the transformation as you bring this retro charm into your home!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.
the
22/12/2025
at
04:57 h
the
22/09/2025
at
00:11 h
the
05/12/2024
at
20:22 h