Stacked Stone Effect textured wallpaper
Reference: P8532A contemporary room featuring a faux stacked stone wall with a three-dimensional effect. The geometric pattern provides a modern and sophisticated touch, ideal for creating a focal point in an interior space.
The Stacked Stone Effect textured wallpaper features a modern and interior design with a stunning 3D effect. The brown, geometric pattern creates a stylish and contemporary look, mimicking the appearance of a brick wall with a textured stone effect. This non-woven wallpaper is manufactured in matt colours, offering a durable and long-lasting solution for interior decoration. With a grammage of 180 grams per square metre and a 10-15 year durability, this wallpaper is a high-quality choice for any space. Applying the Stacked Stone Effect textured wallpaper is easy with the use of glue, a roller, brush, and cutter. It can be effortlessly cleaned with a damp cloth and neutral soap, providing a low-maintenance option for decorating. Additionally, the wallpaper is fire certified and can be easily removed by wetting the product with a sprayer. This product is produced and shipped in rolls 50 centimetres wide, making it convenient for installation.
Why this product should be used for decoration
The Stacked Stone Effect textured wallpaper is the ideal choice for decoration, adding a modern and stylish touch to any interior space. The brown, 3D geometric pattern creates a visually appealing design, mimicking the appearance of a textured stone wall. Elevate the look of your space with this high-quality and durable wallpaper that offers a long-lasting solution for interior decoration.
How to apply this product
Applying the Stacked Stone Effect textured wallpaper is a simple process that can be done with ease. Using glue, a roller, brush, and cutter, you can effortlessly install this wallpaper to create a stunning interior design. Enhance the look of your space with this easy-to-apply wallpaper that offers a durable and modern solution for decoration.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.