Tile effect wallpaper light grey aged tiles
Reference: P12084Transform your space with our Tile effect wallpaper light grey aged tiles, featuring a stunning design that mimics the look of aged tiles in a soft light grey tone. This wallpaper is crafted from non-woven material and is manufactured in matt colours, ensuring a sophisticated and contemporary appearance. With its durability of 10-15 years and ease of maintenance, this wallpaper is not only beautiful but practical too! It can be effortlessly cleaned with a damp cloth and a little neutral soap, making it ideal for any room in your home.
Why this product should be used for decoration
The Tile effect wallpaper light grey aged tiles tile effect wallpaper is the perfect choice for those looking to elevate their home decor. Its elegant design brings a touch of rustic charm to modern interiors, creating a cozy atmosphere that welcomes everyone. With its versatile style, this wallpaper can complement various design themes, from minimalist to industrial. Immerse yourself in the beauty of aged tiles without the commitment of real tiles. Let your walls tell a story of timeless elegance!
How to apply this product
Applying the Tile effect wallpaper light grey aged tiles tile effect wallpaper is a breeze! Use glue on the wall or directly on the product, and simply employ a roller, brush, cutter, and sprayer for a flawless finish. Enjoy the satisfaction of transforming your space with ease!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.