Tile effect wallpaper talavera floral design
Reference: P11271Transform your space with our stunning Tile effect wallpaper talavera floral design, featuring an exquisite blend of vibrant colors and intricate floral patterns that evoke the charm of traditional Talavera tiles. This non-woven wallpaper is crafted with matt colours that create a soft, inviting ambiance in any room. With a grammage of 180 grams per square metre, it offers durability and longevity, making it a perfect choice for both modern and classic interiors.
Why this product should be used for decoration
The Tile effect wallpaper talavera floral design tile effect wallpaper is an exceptional choice for those looking to elevate their home decor. Its beautiful floral patterns and tile effect create a sense of sophistication and warmth, making any space feel more inviting and stylish. Imagine stepping into a room adorned with this breathtaking wallpaper; it instantly transforms your environment and sparks joy! Perfect for living rooms, dining areas, or bedrooms, it inspires creativity and adds a touch of elegance to every corner.
How to apply this product
Applying the Tile effect wallpaper talavera floral design tile effect wallpaper is a breeze! Simply use glue to adhere it to your wall, employing tools like a roller, brush, and cutter for a seamless finish. Enjoy the process of enhancing your home with this beautiful wallpaper!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.