Tropical Leafy Pattern leaves wallpaper
Reference: P7318Featuring a nature-inspired pattern, this image presents a lush tapestry of tropical foliage. The leafy design creates a botanical ambiance, evoking the serenity of a dense rainforest.
The Tropical Leafy Pattern leaves wallpaper features a stunning design inspired by nature, with lush, tropical palms and a beautiful blue pattern. This non-woven wallpaper is manufactured in matt colours, giving it a sophisticated and elegant finish. The material is durable, with a grammage of 180 grams per square metre and a longevity of 10-15 years. Applying this wallpaper is easy with just glue, a roller, a brush, and a cutter. It can also be cleaned with a damp cloth and neutral soap, making maintenance a breeze. Additionally, it has an M2 reaction to fire certification for safety and peace of mind. When it's time for a change, the wallpaper can be easily removed by wetting it with a sprayer. Each roll is 50 centimetres wide, ensuring that it's convenient to handle during installation.
Why this product should be used for decoration
The Tropical Leafy Pattern leaves wallpaper is the perfect choice for adding a touch of tropical paradise to any space. Its nature-inspired design brings a sense of tranquility and relaxation, making it ideal for creating a calming oasis in any room. Whether it's used in a living room, bedroom, or office, this wallpaper will instantly elevate the decor and create a refreshing ambiance that's sure to impress.
How to apply this product
Applying the Tropical Leafy Pattern leaves wallpaper is a simple and straightforward process. Start by preparing the wall surface and gathering the necessary tools, including glue, a roller, a brush, and a cutter. Then, carefully measure and cut the wallpaper to fit the desired area. Apply the glue to the wall and carefully position the wallpaper, using a brush to smooth out any air bubbles. Finally, trim any excess wallpaper with a cutter for a perfect fit. With these easy steps, transforming any space with this stunning wallpaper is a breeze.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.